Enamel Cover Coat Frits

Code	Name	Firing temp(℃)	（1/℃）EXP.Coefficient 20-150°C
SAC200	Sb White Enamel Cover Coat Frit	800-840	330.76x10-7
STC3406	Ti Ivory Enamel Cover Coat Frit	760-820	312.60x10-7
STC3407	Ti Cream Enamel Cover Coat Frit	780-840	310.10x10-7
STC3415	Low Temp Ti White Enamel Cover Coat Frit	780-820	273.80x10-7
STC3416	Ti Ivory Enamel Cover Coat Frit	760-820	313.50x10-7
STC3417	Low Temp Ti White Enamel Cover Coat Frit	780-820	282.00x10-7
STC3418	Low Temp Ti White Enamel Cover Coat Frit	760-820	276.70x10-7
STC3419	Low Temp Ti White Enamel Cover Coat Frit	760-800	275.90x10-7
STC400	High Temp Ti White Enamel Cover Coat Frit	820-860	282.30x10-7
STC406	Ti Ivory Enamel Cover Coat Frit	800-850	314.32x10-7
STC407-1	Ti Cream Enamel Cover Coat Frit	800-850	312.40x10-7
STC407C	Ti Cream Enamel Cover Coat Frit	800-850	292.50x10-7
STC409	Ti Lake Blue Enamel Cover Coat Frit	800-840	309.68x10-7
STC412	Ti Pink Enamel Cover Coat Frit	800-840	285.00x10-7
STC415	Low Temp Ti White Enamel Cover Coat Frit	780-820	264.33x10-7
STC421	Low Temp Ti White Enamel Cover Coat Frit	780-820	272.70x10-7
STC422	Low Temp Ti White Enamel Cover Coat Frit	780-820	273.10x10-7
STC430	Ti Grey Enamel Cover Coat Frit	800-840	285.20x10-7
SDB503A	Royal Blue Enamel Cover Coat Frit	800-840	301.60x10-7
SDB503-1	Jewel Blue Enamel Cover Coat Frit	800-840	337.06x10-7

Instruction：

1、Instruction: Enamel cover coat frits have good opacity and gloss with clean and fine surface, but they can't be directly coated on the based metal, they require the matched ground coat frits. The firing temperature of cover coat frit is lower than that of ground coat frit.

2、Mill addition ratio and requirements of Titanium frits：

Frit	100	Water	45-55
Urea	0-0.5	Fineness	1.0-2.0g/150mesh.100ml
Clay	5-6	Specific gravity	160-168g/100ml
Potassium chloride	0-0.2

3、Mill addition ratio and requirements of Antimony frits：

Frit	100	Water	40-50
Clay	6-7	Fineness	1.0-2.0g/150mesh.100ml
Specific gravity of slip	170-175g/100ml