Enamel Ground Coat Frits / One CoatingFrits

Ni Ground Coat Frits

Code	Name	Firing temp(℃)	（1/℃）EXP.Coefficient 20-150°C
SGC102	Mid Temp Ni Ground Coat Frit	840-880	302.63x10-7
SGC103	High Temp Ni Ground Coat Frit	840-880	293.30x10-7
SGC105	Mid Temp Ni Ground Coat Frit	800-860	304.42x10-7
SGC105A	Mid Temp Ni Ground Coat Frit	800-860	342.50x10-7
SGC106	High Temp Ni Ground Coat Frit	830-900	303.04x10-7
SGC107	Low Temp Ni Ground Coat Frit	800-860	308.50x10-7

Sb-Mo Ground Coat Frit

Code	Name	Firing temp(℃)	（1/℃）EXP.Coefficient 20-150°C
SGC108	High Temp Sb-Mo Ground Coat Frit	860-900	291.48x10-7
SGC118	Mid Temp Sb-Mo Ground Coat Frit	800-860	296.90x10-7
SGC128	Low Temp Sb-Mo Ground Coat Frit	780-860	316.68x10-7

Co-Ni Ground Coat Frits

Code	Name	Firing temp(℃)	（1/℃）EXP.Coefficient 20-150°C
SGC110-3	Low Temp Co-Ni Ground Coat Frit	790-800	314.20x10-7
SGC126	Mid Temp Co-Ni Ground Coat Frit	830-880	295.56x10-7
SGC126-2	Mid Temp Co-Ni Ground Coat Frit	850-860	298.10x10-7
SGC131	Mid Temp Co-Ni Ground Coat Frit	800-840	331.80x10-7
SGC158	Low Temp Co-Ni Ground Coat Frit	760-860	323.80x10-7
SGC159	Low Temp Co-Ni Ground Coat Frit	780-840	330.80x10-7
SGC170	Low Temp Co-Ni Ground Coat Frit	780-840	314.90x10-7
SGC170-3	Low Temp Co-Ni Ground Coat Frit	830-840	309.20x10-7
SGC170-4	Low Temp Co-Ni Ground Coat Frit	760-860	327.00x10-7
SGC171	Mid Temp Co-Ni Ground Coat Frit	780-840	312.06x10-7
SGC172	Mid Temp Co-Ni Ground Coat Frit	800-860	298.10x10-7
SGC176	Mid Temp Co-Ni Ground Coat Frit	800-860	310.20x10-7
SGC178	Mid Temp Co-Ni Ground Coat Frit	800-860	307.40x10-7
SGC179	High Temp Co-Ni Ground Coat Frit	830-900	303.48x10-7
SGC181	Mid Temp Co-Ni Ground Coat Frit	800-880	280.20x10-7
SGC202	High Temp Co-Ni Ground Coat Frit	830-880	275.00x10-7
SGC3126	High Temp Co-Ni Ground Coat Frit	830-880	294.50x10-7
SGC3126A	High Temp Co-Ni Ground Coat Frit	830-880	301.20x10-7
SGC3172	Mid Temp Co-Ni Ground Coat Frit	800-860	290.40x10-7

Instruction：

1、Ground coat frits are normally coated on the low carbon steel. They have good adherence and wide firing range. They can be used separately or mixed with other ground coat frits according to different firing temperatures.

2、Mill addition ratios and requirements of Sb-Mo ground coat frits：

Frit	100	Barium molybdenum	0.8-1.0
Clay	5-7	Borax	0.2-0.5
Quartz	0-8	Sodium nitrite	0.1-0.3
Antimony Oxide	0.8-1.0	Water	55-65
Fineness	0.5-1.0g/150mesh.100ml	Specific gravity of slip	160-170g/100ml

3、Mill addition ratios and requirements of Ni ground coat frits and Co-Ni ground coat frits：

Frit	100	Borax	0.2-0.5
Clay	5-7	Sodium nitrite	0.1-0.3
Quartz	0-8	Water	50-55
Fineness	0.5-1.0g/150mesh.100ml	Specific gravity of slip	160-170g/100ml